Journal cover Journal topic
Geoscientific Instrumentation, Methods and Data Systems An interactive open-access journal of the European Geosciences Union
Geosci. Instrum. Method. Data Syst., 2, 71-77, 2013
http://www.geosci-instrum-method-data-syst.net/2/71/2013/
doi:10.5194/gi-2-71-2013
© Author(s) 2013. This work is distributed
under the Creative Commons Attribution 3.0 License.
Research article
07 Feb 2013
Autonomous distributed temperature sensing for long-term heated applications in remote areas
A.-M. Kurth1,2, N. Dawes3, J. Selker4, and M. Schirmer1,2 1Department of Water Resources and Drinking Water, Eawag, Swiss Federal Institute of Aquatic Science and Technology, Überlandstrasse 133, 8600 Dübendorf, Switzerland
2The Center of Hydrogeology and Geothermics (CHYN), University of Neuchâtel, Rue Emile-Argand 11, 2000 Neuchâtel, Switzerland
3Department of Snow and Permafrost, WSL Institute for Snow and Avalanche Research SLF, Flüelastrasse 11, 7260 Davos Dorf, Switzerland
4Department of Biological and Ecological Engineering, Oregon State University, 210 Gilmore Hall, Corvallis, Oregon 97331, USA
Abstract. Distributed temperature sensing (DTS) is a fiber-optical method enabling simultaneous temperature measurements over long distances. Electrical resistance heating of the metallic components of the fiber-optic cable provides information on the thermal characteristics of the cable's environment, providing valuable insight into processes occurring in the surrounding medium, such as groundwater–surface water interactions, dam stability or soil moisture. Until now, heated applications required direct handling of the DTS instrument by a researcher, rendering long-term investigations in remote areas impractical due to the often difficult and time-consuming access to the field site. Remote control and automation of the DTS instrument and heating processes, however, resolve the issue with difficult access. The data can also be remotely accessed and stored on a central database. The power supply can be grid independent, although significant infrastructure investment is required here due to high power consumption during heated applications. Solar energy must be sufficient even in worst case scenarios, e.g. during long periods of intense cloud cover, to prevent system failure due to energy shortage. In combination with storage batteries and a low heating frequency, e.g. once per day or once per week (depending on the season and the solar radiation on site), issues of high power consumption may be resolved. Safety regulations dictate adequate shielding and ground-fault protection, to safeguard animals and humans from electricity and laser sources. In this paper the autonomous DTS system is presented to allow research with heated applications of DTS in remote areas for long-term investigations of temperature distributions in the environment.

Citation: Kurth, A.-M., Dawes, N., Selker, J., and Schirmer, M.: Autonomous distributed temperature sensing for long-term heated applications in remote areas, Geosci. Instrum. Method. Data Syst., 2, 71-77, doi:10.5194/gi-2-71-2013, 2013.
Publications Copernicus
Download
Share