A fast Fourier transform was applied to fit the geomagnetic diurnal variation. Fitting results showed that when the polynomial degree was greater than 160, the residual error was close to 0 nT. White noise is the main component of the residual error when the polynomial degree was greater than 160, so this method was adopted to calculate the background noise of the geomagnetic field. Spectrum analysis further demonstrated the necessity to remove background noise from geomagnetic data.

To assess the performance of the developed EM receivers, this paper presents a multifunctional waveform generator with three waveforms: 1) a wideband, low-noise electromagnetic field signal to be used for magnetotelluric, audio-magnetotelluric, and long-period magnetotelluric studies; 2) a repeating frequency sweep square waveform for CSAMT and SIP studies; and 3) a “positive-zero–negative-zero” signal that contains primary and secondary fields for time-domain-induced polarization studies.

Despite its importance to a range of applied and fundamental studies, and obvious parallels to a robust network of magnetic-field observatories, long-term geoelectric field monitoring is rarely performed. The installation of a new geoelectric monitoring system at the Boulder magnetic observatory of the US Geological Survey is summarized. Data from the system are expected, among other things, to be used for testing and validating algorithms for mapping North American geoelectric fields.

A numerical inversion approach to detect and localize inclusions in thick walls under quasi-periodic natural solicitations is presented. It is based on a preliminary analysis of surface temperature field evolution with time. This analysis is improved by taking advantage of a priori information provided by ground-penetrating radar reconstructions. In this way, it is possible to improve the accuracy of the images achievable with the stand-alone thermal reconstruction method.

A new approach, based on the MRB magnetic field measurements radiated by two fixed and spaced RTI three-component magnetic field receivers and the solution of the inverse problem using these measurement results, was proposed and the concept of the MILES equipment for MRB search and localization was developed and successfully tested.

The increase in the accuracy of the electric field measurement can significantly improve the quality of MT data. The paper deals with the peculiarities of the development of a new version of the instrument for the measurements of electric fields at MT – both electric field sensors and the electrometer. The results of experimental tests of the new sensors and the electrometer included as a unit in the long-period magnetotelluric station LEMI-420 are given.