Articles | Volume 6, issue 2
https://doi.org/10.5194/gi-6-257-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
https://doi.org/10.5194/gi-6-257-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
Research article
| 
13 Jul 2017
Research article |
| 13 Jul 2017
Semiautomatic sun shots with the WIDIF DIflux
Jean L. Rasson
CORRESPONDING AUTHOR
Royal Meteorological Institute, Centre de Physique du Globe, Dourbes, 5670,
Belgium
Olivier Hendrickx
Royal Meteorological Institute, Centre de Physique du Globe, Dourbes, 5670,
Belgium
Jean-Luc Marin
Royal Meteorological Institute, Centre de Physique du Globe, Dourbes, 5670,
Belgium
Related authors
Alexandre Gonsette, Jean Rasson, Stephan Bracke, Antoine Poncelet, Olivier Hendrickx, and François Humbled
Geosci. Instrum. Method. Data Syst., 6, 439–446, https://doi.org/10.5194/gi-6-439-2017, https://doi.org/10.5194/gi-6-439-2017, 2017
Short summary
Short summary
Absolute magnetic measurements require the vertical and the geographic north as reference directions. We present here a novel system able to measure the direction of the magnetic field and of the vertical and true north. A design of a north seeker is proposed that takes into account sensor bias as well as misalignment errors. Different methods are derived from this model and measurement results are presented. A measurement test at high latitude is also shown.
Antoine Poncelet, Alexandre Gonsette, and Jean Rasson
Geosci. Instrum. Method. Data Syst., 6, 353–360, https://doi.org/10.5194/gi-6-353-2017, https://doi.org/10.5194/gi-6-353-2017, 2017
Short summary
Short summary
In this paper, we give some background on calibration and verification of our automatic DI-flux instrument and then compare the automatic absolute magnetic measurements
with the human-made and discuss the advantages and disadvantages of automatic measurements.
Alexandre Gonsette, Jean Rasson, and François Humbled
Geosci. Instrum. Method. Data Syst., 6, 361–366, https://doi.org/10.5194/gi-6-361-2017, https://doi.org/10.5194/gi-6-361-2017, 2017
Short summary
Short summary
We present a novel method for calibrating magnetic observatories. We show how magnetometer baselines can highlight a possible calibration error. We also provide a method based on high-frequency automatic absolute measurements. This method determines a transformation matrix for correcting raw data suffering from scale factor and orientation errors. We finally present a practical case where covered data have been successfully compared to those coming from a reference magnetometer.
Stephan Bracke, Alexandre Gonsette, Jean Rasson, Antoine Poncelet, and Olivier Hendrickx
Geosci. Instrum. Method. Data Syst., 6, 285–292, https://doi.org/10.5194/gi-6-285-2017, https://doi.org/10.5194/gi-6-285-2017, 2017
Short summary
Short summary
In 2013 the scientists from the geophysical centre in Dourbes started a project to install a fully automated observatory in Antarctica. The ultimate aim is to have real-time data coming in to Dourbes every second. After evaluation of different data transfer protocols, we chose to use Message Queuing Telemetry Transport (MQTT) and receive the 1 s data with a negligible latency cost and no loss of data.
Santiago Marsal, Juan José Curto, Joan Miquel Torta, Alexandre Gonsette, Vicent Favà, Jean Rasson, Miquel Ibañez, and Òscar Cid
Geosci. Instrum. Method. Data Syst., 6, 269–277, https://doi.org/10.5194/gi-6-269-2017, https://doi.org/10.5194/gi-6-269-2017, 2017
Short summary
Short summary
Commercial solutions for an automated DI-flux are practically reduced to the AutoDIF and the GyroDIF. We analyze the pros and cons of both in terms of suitability at the Livingston Island geomagnetic observatory, Antarctica. We conclude that the GyroDIF is more suitable for harsh conditions due to its simpler infrastructure. We also show the instrument housing design and its control electronics. Our experiences can benefit the geomagnetic community, which often faces similar challenges.
Alexandre Gonsette, Jean Rasson, Stephan Bracke, Antoine Poncelet, Olivier Hendrickx, and François Humbled
Geosci. Instrum. Method. Data Syst., 6, 439–446, https://doi.org/10.5194/gi-6-439-2017, https://doi.org/10.5194/gi-6-439-2017, 2017
Short summary
Short summary
Absolute magnetic measurements require the vertical and the geographic north as reference directions. We present here a novel system able to measure the direction of the magnetic field and of the vertical and true north. A design of a north seeker is proposed that takes into account sensor bias as well as misalignment errors. Different methods are derived from this model and measurement results are presented. A measurement test at high latitude is also shown.
Antoine Poncelet, Alexandre Gonsette, and Jean Rasson
Geosci. Instrum. Method. Data Syst., 6, 353–360, https://doi.org/10.5194/gi-6-353-2017, https://doi.org/10.5194/gi-6-353-2017, 2017
Short summary
Short summary
In this paper, we give some background on calibration and verification of our automatic DI-flux instrument and then compare the automatic absolute magnetic measurements
with the human-made and discuss the advantages and disadvantages of automatic measurements.
Alexandre Gonsette, Jean Rasson, and François Humbled
Geosci. Instrum. Method. Data Syst., 6, 361–366, https://doi.org/10.5194/gi-6-361-2017, https://doi.org/10.5194/gi-6-361-2017, 2017
Short summary
Short summary
We present a novel method for calibrating magnetic observatories. We show how magnetometer baselines can highlight a possible calibration error. We also provide a method based on high-frequency automatic absolute measurements. This method determines a transformation matrix for correcting raw data suffering from scale factor and orientation errors. We finally present a practical case where covered data have been successfully compared to those coming from a reference magnetometer.
Stephan Bracke, Alexandre Gonsette, Jean Rasson, Antoine Poncelet, and Olivier Hendrickx
Geosci. Instrum. Method. Data Syst., 6, 285–292, https://doi.org/10.5194/gi-6-285-2017, https://doi.org/10.5194/gi-6-285-2017, 2017
Short summary
Short summary
In 2013 the scientists from the geophysical centre in Dourbes started a project to install a fully automated observatory in Antarctica. The ultimate aim is to have real-time data coming in to Dourbes every second. After evaluation of different data transfer protocols, we chose to use Message Queuing Telemetry Transport (MQTT) and receive the 1 s data with a negligible latency cost and no loss of data.
Santiago Marsal, Juan José Curto, Joan Miquel Torta, Alexandre Gonsette, Vicent Favà, Jean Rasson, Miquel Ibañez, and Òscar Cid
Geosci. Instrum. Method. Data Syst., 6, 269–277, https://doi.org/10.5194/gi-6-269-2017, https://doi.org/10.5194/gi-6-269-2017, 2017
Short summary
Short summary
Commercial solutions for an automated DI-flux are practically reduced to the AutoDIF and the GyroDIF. We analyze the pros and cons of both in terms of suitability at the Livingston Island geomagnetic observatory, Antarctica. We conclude that the GyroDIF is more suitable for harsh conditions due to its simpler infrastructure. We also show the instrument housing design and its control electronics. Our experiences can benefit the geomagnetic community, which often faces similar challenges.
Related subject area
Magnetometers
Quad-Mag board for CubeSat applications
In situ calibration of the Swarm-Echo magnetometers
Tesseract – a high-stability, low-noise fluxgate sensor designed for constellation applications
Single-event effect testing of the PNI RM3100 magnetometer for space applications
Contributors to fluxgate magnetic noise in permalloy foils including a potential new copper alloy regime
A towed magnetic gradiometer array for rapid, detailed imaging of utility, geological, and archaeological targets
The fluxgate magnetometer of the Low Orbit Pearl Satellites (LOPS): overview of in-flight performance and initial results
Error estimate for fluxgate magnetometer in-flight calibration on a spinning spacecraft
Radiation tolerance of the PNI RM3100 magnetometer for a Europa lander mission
Maximum-variance gradiometer technique for removal of spacecraft-generated disturbances from magnetic field data
In-orbit results of the Coupled Dark State Magnetometer aboard the China Seismo-Electromagnetic Satellite
How many solar wind data are sufficient for accurate fluxgate magnetometer offset determinations?
Low-noise permalloy ring cores for fluxgate magnetometers
The combined processing of geomagnetic intensity vector projections and absolute magnitude measurements
A low-cost device for measuring local magnetic anomalies in volcanic terrain
In situ calibration of offsetting magnetometer feedback transients on the Cassiope spacecraft
A network of magnetometers for multi-scale urban science and informatics
Advanced calibration of magnetometers on spin-stabilized spacecraft based on parameter decoupling
A hybrid fluxgate and search coil magnetometer concept using a racetrack core
Investigation of a low-cost magneto-inductive magnetometer for space science applications
Numerical evaluation of magnetic absolute measurements with arbitrarily distributed DI-fluxgate theodolite orientations
Merging fluxgate and induction coil data to produce low-noise geomagnetic observatory data meeting the INTERMAGNET definitive 1 s data standard
Saint Petersburg magnetic observatory: from Voeikovo subdivision to INTERMAGNET certification
The effect of winding and core support material on the thermal gain dependence of a fluxgate magnetometer sensor
Magnetogama: an open schematic magnetometer
Possibilities of further improvement of 1 s fluxgate variometers
Measurement experiences with FluxSet digital D/I station
An automatic DI-flux at the Livingston Island geomagnetic observatory, Antarctica: requirements and lessons learned
Optimized merging of search coil and fluxgate data for MMS
Distance scaling method for accurate prediction of slowly varying magnetic fields in satellite missions
Mars MOURA magnetometer demonstration for high-resolution mapping on terrestrial analogues
Calibration of QM-MOURA three-axis magnetometer and gradiometer
The origin of noise and magnetic hysteresis in crystalline permalloy ring-core fluxgate sensors
Protection against lightning at a geomagnetic observatory
An initial investigation of the long-term trends in the fluxgate magnetometer (FGM) calibration parameters on the four Cluster spacecraft
Interinstrument calibration using magnetic field data from the flux-gate magnetometer (FGM) and electron drift instrument (EDI) onboard Cluster
Harmonic quiet-day curves as magnetometer baselines for ionospheric current analyses
A radiation hardened digital fluxgate magnetometer for space applications
Contribution to solving the orientation problem for an automatic magnetic observatory
Automatic parameterization for magnetometer zero offset determination
Brady P. Strabel, Leonardo H. Regoli, Mark B. Moldwin, Lauro V. Ojeda, Yining Shi, Jacob D. Thoma, Isaac S. Narrett, Bret Bronner, and Matthew Pellioni
Geosci. Instrum. Method. Data Syst., 11, 375–388, https://doi.org/10.5194/gi-11-375-2022, https://doi.org/10.5194/gi-11-375-2022, 2022
Short summary
Short summary
The design, characteristics, and performance of a CubeSat magnetometer board (Quad-Mag) equipped with four PNI RM3100 magnetometers is presented. The inclusion of four sensors allows a potential factor of 2 reduction in the noise floor established for an individual sensor via oversampling with multiple sensors. The Quad-Mag is shown to enable 1 nT magnetic field measurements at 1 Hz and 5.345 nT at 65 Hz using commercial off-the-shelf sensors for space applications.
Robert M. Broadfoot, David M. Miles, Warren Holley, and Andrew D. Howarth
Geosci. Instrum. Method. Data Syst., 11, 323–333, https://doi.org/10.5194/gi-11-323-2022, https://doi.org/10.5194/gi-11-323-2022, 2022
Short summary
Short summary
The Swarm-Echo Satellite carries two magnetometers that allow us to obtain two independent measurements of the changes that occur in the Earth's magnetic field during events such as aurora. Magnetometers must be independently calibrated to ensure they remain accurate. If no magnetic reference is available, a model magnetic field must be used. This paper discusses the method used to calibrate the magnetometers on Swarm-Echo and shows the improvements the calibration has made to the data product.
Kenton Greene, Christian Hansen, B. Barry Narod, Richard Dvorsky, and David M. Miles
Geosci. Instrum. Method. Data Syst., 11, 307–321, https://doi.org/10.5194/gi-11-307-2022, https://doi.org/10.5194/gi-11-307-2022, 2022
Short summary
Short summary
The ability to make reliable magnetic measurements in space is very important for a broad range of applications in space science. Here, we present the design and performance of a new magnetometer that looks very promising for making stable reliable magnetic measurements in space. We show that Tesseract performs better than the traditional ring-core design in metrics that are associated with stability.
Mark B. Moldwin, Edward Wilcox, Eftyhia Zesta, and Todd M. Bonalsky
Geosci. Instrum. Method. Data Syst., 11, 219–222, https://doi.org/10.5194/gi-11-219-2022, https://doi.org/10.5194/gi-11-219-2022, 2022
Short summary
Short summary
The commercial off-the-shelf (COTS) PNI RM3100 magnetometer was tested for single-event latchup (SEL) at Lawrence Berkeley National Laboratory's heavy-ion beam and did not experience any single-event effects at a linear energy transfer >75 MeV cm2 mg−1. Coupled with previous total ionizing dose (TID) testing at the University of Michigan and NASA Goddard Space Flight Center that showed no degradation in performance up to 150 kRad(SI), the COTS PNI RM3100 is extremely radiation tolerant.
David M. Miles, Richard Dvorsky, Kenton Greene, Christian T. Hansen, B. Barry Narod, and Michael D. Webb
Geosci. Instrum. Method. Data Syst., 11, 111–126, https://doi.org/10.5194/gi-11-111-2022, https://doi.org/10.5194/gi-11-111-2022, 2022
Short summary
Short summary
We present an experiment intended to enable extremely low-noise magnetic field measurements. We manufactured fluxgate magnetometer cores using two metal alloys, two geometries, two foil thicknesses, and six different heat treatments and compared the resulting material properties, power consumption, and magnetic noise. Our results suggest that thinner foils, potentially using a new copper alloy, manufactured into continuous racetrack washers may provide excellent performance in fluxgate sensors.
M. Andy Kass, Esben Auken, Jakob Juul Larsen, and Anders Vest Christiansen
Geosci. Instrum. Method. Data Syst., 10, 313–323, https://doi.org/10.5194/gi-10-313-2021, https://doi.org/10.5194/gi-10-313-2021, 2021
Short summary
Short summary
We have developed a towed magnetic gradiometer system for rapid acquisition of magnetic and magnetic gradient maps. This high-resolution system is flexible and has applications to utility detection, archaeology, unexploded ordnance, or any other applications where high-resolution maps of the magnetic field or gradient are required. Processing of the data has been simplified as much as possible to facilitate rapid results and interpretations.
Ye Zhu, Aimin Du, Hao Luo, Donghai Qiao, Ying Zhang, Yasong Ge, Jiefeng Yang, Shuquan Sun, Lin Zhao, Jiaming Ou, Zhifang Guo, and Lin Tian
Geosci. Instrum. Method. Data Syst., 10, 227–243, https://doi.org/10.5194/gi-10-227-2021, https://doi.org/10.5194/gi-10-227-2021, 2021
Short summary
Short summary
The Low Orbit Pearl Satellites measure magnetic field with high spatial coverage. Although there is no magnetic cleanliness to the satellites, the triple sensor configuration enables removal of interference. Results show they can capture the Earth’s internal as well as external fields from the magnetosphere–ionosphere current system. This study implies that a large number of small low-cost satellites without magnetic cleanliness could be the future for space magnetic exploration.
Yasuhito Narita, Ferdinand Plaschke, Werner Magnes, David Fischer, and Daniel Schmid
Geosci. Instrum. Method. Data Syst., 10, 13–24, https://doi.org/10.5194/gi-10-13-2021, https://doi.org/10.5194/gi-10-13-2021, 2021
Short summary
Short summary
The systematic error of calibrated fluxgate magnetometer data is studied for a spinning spacecraft. The major error comes from the offset uncertainty when the ambient magnetic field is low, while the error represents the combination of non-orthogonality, misalignment to spacecraft reference direction, and gain when the ambient field is high. The results are useful in developing future high-precision magnetometers and an error estimate in scientific studies using magnetometer data.
Leonardo H. Regoli, Mark B. Moldwin, Connor Raines, Tom A. Nordheim, Cameron A. Miller, Martin Carts, and Sara A. Pozzi
Geosci. Instrum. Method. Data Syst., 9, 499–507, https://doi.org/10.5194/gi-9-499-2020, https://doi.org/10.5194/gi-9-499-2020, 2020
Short summary
Short summary
One of the four Galilean moons of Jupiter, Europa, is one of the most promising places in the solar system to find life outside Earth. For this reason, the space science community is currently focused on exploring it. One of the main difficulties of such a task is the harsh radiation environment caused by the radiation belts of Jupiter. In this paper, we present results for a magnetic field sensor being exposed to radiation levels similar to those expected at the surface of Europa.
Ovidiu Dragoş Constantinescu, Hans-Ulrich Auster, Magda Delva, Olaf Hillenmaier, Werner Magnes, and Ferdinand Plaschke
Geosci. Instrum. Method. Data Syst., 9, 451–469, https://doi.org/10.5194/gi-9-451-2020, https://doi.org/10.5194/gi-9-451-2020, 2020
Short summary
Short summary
We propose a gradiometer-based technique for cleaning multi-sensor magnetic field data acquired on board spacecraft. The technique takes advantage on the fact that the maximum-variance direction of many AC disturbances on board spacecraft does not change over time. We apply the proposed technique to the SOSMAG instrument on board GeoKompsat-2A. We analyse the performance and limitations of the technique and discuss in detail how various disturbances are removed.
Andreas Pollinger, Christoph Amtmann, Alexander Betzler, Bingjun Cheng, Michaela Ellmeier, Christian Hagen, Irmgard Jernej, Roland Lammegger, Bin Zhou, and Werner Magnes
Geosci. Instrum. Method. Data Syst., 9, 275–291, https://doi.org/10.5194/gi-9-275-2020, https://doi.org/10.5194/gi-9-275-2020, 2020
Ferdinand Plaschke
Geosci. Instrum. Method. Data Syst., 8, 285–291, https://doi.org/10.5194/gi-8-285-2019, https://doi.org/10.5194/gi-8-285-2019, 2019
Short summary
Short summary
Measuring the magnetic field onboard spacecraft requires regular in-flight calibration activities. Among those, determining the output of magnetometers under vanishing ambient magnetic fields, the so-called magnetometer offsets, is essential. Typically, characteristic rotations in solar wind magnetic fields are used to obtain these offsets. This paper addresses the question of how many solar wind data are needed to reach certain accuracy levels in offset determination.
David M. Miles, Miroslaw Ciurzynski, David Barona, B. Barry Narod, John R. Bennest, Andy Kale, Marc Lessard, David K. Milling, Joshua Larson, and Ian R. Mann
Geosci. Instrum. Method. Data Syst., 8, 227–240, https://doi.org/10.5194/gi-8-227-2019, https://doi.org/10.5194/gi-8-227-2019, 2019
Short summary
Short summary
Fluxgate magnetometers provide magnetic field measurements for geophysics and space physics. A low-noise ferromagnetic ring core typically determines the noise performance of the instrument. Much of the basic research into producing low-noise fluxgate sensors was completed in the 1960s for military purposes and was never publicly released. We present a manufacturing approach that can consistently produce fluxgate ring cores with a noise performance comparable to the legacy ring cores used today.
Victor G. Getmanov, Alexei D. Gvishiani, and Roman V. Sidorov
Geosci. Instrum. Method. Data Syst., 8, 209–215, https://doi.org/10.5194/gi-8-209-2019, https://doi.org/10.5194/gi-8-209-2019, 2019
Short summary
Short summary
The material in this research paper is intended for specialists engaged in digital processing of geomagnetic field measurements. A technique is discussed that can help to reduce the errors in measurements and can be applied in various tasks of digital processing of geomagnetic data from vector magnetometers and other three-component data. The results of the tests on model and real geomagnetic data are provided for the algorithm along with the conclusions about its possibilities.
Bertwin M. de Groot and Lennart V. de Groot
Geosci. Instrum. Method. Data Syst., 8, 217–225, https://doi.org/10.5194/gi-8-217-2019, https://doi.org/10.5194/gi-8-217-2019, 2019
Short summary
Short summary
Our knowledge of the Earth's magnetic field arises from magnetic signals stored in lavas. In rugged volcanic terrain, however, the magnetization of the underlying flows may influence the magnetic field as recorded by newly formed flows on top. To measure these local magnetic anomalies, we developed a low-cost field magnetometer with superior accuracy and user-friendliness. The first measurements on Mt. Etna show local magnetic variations that are much larger than expected.
David M. Miles, Andrew D. Howarth, and Greg A. Enno
Geosci. Instrum. Method. Data Syst., 8, 187–195, https://doi.org/10.5194/gi-8-187-2019, https://doi.org/10.5194/gi-8-187-2019, 2019
Short summary
Short summary
Measurements from the magnetic field instrument on the Cassiope spacecraft were found to be degraded by an artifact of how the instrument tracks the changing magnetic field as the spacecraft orbits the Earth. We present a process to characterize this effect on orbit and compensate for it in the post–processing of the data. This work allows the instrument to accurately track rapidly changing local fields without loss of measurement fidelity and improves the high–frequency noise of the data.
Trevor A. Bowen, Elena Zhivun, Arne Wickenbrock, Vincent Dumont, Stuart D. Bale, Christopher Pankow, Gregory Dobler, Jonathan S. Wurtele, and Dmitry Budker
Geosci. Instrum. Method. Data Syst., 8, 129–138, https://doi.org/10.5194/gi-8-129-2019, https://doi.org/10.5194/gi-8-129-2019, 2019
Short summary
Short summary
We highlight the development of a low-cost portable sensor array to study magnetic fields in urban areas. Recent advancements in urban science have demonstrated significant utility in characterizing a city based on physical measurements. Magnetic fields of cities are characterized by significant noise; in the case of the San Francisco Bay Area, this noise is dominated by the BART train system. We demonstrate an ability to identify and extract BART noise from the urban magnetic environment.
Ferdinand Plaschke, Hans-Ulrich Auster, David Fischer, Karl-Heinz Fornaçon, Werner Magnes, Ingo Richter, Dragos Constantinescu, and Yasuhito Narita
Geosci. Instrum. Method. Data Syst., 8, 63–76, https://doi.org/10.5194/gi-8-63-2019, https://doi.org/10.5194/gi-8-63-2019, 2019
Short summary
Short summary
Raw output of spacecraft magnetometers has to be converted into meaningful units and coordinate systems before it is usable for scientific applications. This conversion is defined by 12 calibration parameters, 8 of which are more easily determined in flight if the spacecraft is spinning. We present theory and advanced algorithms to determine these eight parameters. They take into account the physical magnetometer and spacecraft behavior, making them superior to previously published algorithms.
David M. Miles, B. Barry Narod, David K. Milling, Ian R. Mann, David Barona, and George B. Hospodarsky
Geosci. Instrum. Method. Data Syst., 7, 265–276, https://doi.org/10.5194/gi-7-265-2018, https://doi.org/10.5194/gi-7-265-2018, 2018
Short summary
Short summary
We present a proof-of-concept space-flight instrument that can simultaneously make measurements of both the low- and high-frequency local magnetic field. Previously, this would have required two separate instruments that would normally have had to be mounted separately on long deployable booms to keep them from interfering. This new hybrid instrument is expected to be particularly useful on extremely small spacecraft, such as CubeSats, which can only accommodate a few instruments.
Leonardo H. Regoli, Mark B. Moldwin, Matthew Pellioni, Bret Bronner, Kelsey Hite, Arie Sheinker, and Brandon M. Ponder
Geosci. Instrum. Method. Data Syst., 7, 129–142, https://doi.org/10.5194/gi-7-129-2018, https://doi.org/10.5194/gi-7-129-2018, 2018
Short summary
Short summary
The presence of magnetic fields in space dominate the way planets interact with different types of plasmas. Thus, measuring them is extremely important when studying space. We present an instrument capable of measuring magnetic fields at a fraction of the cost, power and size of traditional magnetometers. With this technology, a science-grade magnetometer for small satellites can be achieved, enabling the study of the space environment with large clusters of sensors in future missions.
Heinz-Peter Brunke and Jürgen Matzka
Geosci. Instrum. Method. Data Syst., 7, 1–9, https://doi.org/10.5194/gi-7-1-2018, https://doi.org/10.5194/gi-7-1-2018, 2018
Short summary
Short summary
The long-term drift of magnetometers at geomagnetic observatories is calibrated by a non-magnetic theodolite. We propose a numerical method to evaluate such absolute measurements in a new, more general manner. It is more flexible and helps to identify and correct or discard erroneous measurements. We derive this method and give examples showing how it improves the quality and reliability of the calibrations parameters (the so-called baseline values) of an observatory magnetometer.
Heinz-Peter Brunke, Rudolf Widmer-Schnidrig, and Monika Korte
Geosci. Instrum. Method. Data Syst., 6, 487–493, https://doi.org/10.5194/gi-6-487-2017, https://doi.org/10.5194/gi-6-487-2017, 2017
Short summary
Short summary
In magnetic observatory data, according to the INTERMAGNET definitive 1 s data standard, the fluxgate magnetometer self noise usually covers the natural signal for frequencies higher than about 30 mHz. We present a numerical method how to merge the data with induction coil data in order to drastically reduce noise and to fill the entire possible bandwidth with information on the earth magnetic field. In spectrograms we visualize interesting phenomena revealed with the method.
Roman Sidorov, Anatoly Soloviev, Roman Krasnoperov, Dmitry Kudin, Andrei Grudnev, Yury Kopytenko, Andrei Kotikov, and Pavel Sergushin
Geosci. Instrum. Method. Data Syst., 6, 473–485, https://doi.org/10.5194/gi-6-473-2017, https://doi.org/10.5194/gi-6-473-2017, 2017
Short summary
Short summary
Saint Petersburg Observatory was founded as a geomagnetic branch of the Voyeikovo magnetic and meteorological observatory in the late 1960s. In 2012 the station was upgraded to INTERMAGNET standard and in 2016 it was officially certified as SPG INTERMAGNET magnetic observatory. The SPG data can be downloaded via http://intermagnet.org or
http://geomag.gcras.ru . This paper describes the way the SPG observatory made to become an international geomagnetic network member.
David M. Miles, Ian R. Mann, Andy Kale, David K. Milling, Barry B. Narod, John R. Bennest, David Barona, and Martyn J. Unsworth
Geosci. Instrum. Method. Data Syst., 6, 377–396, https://doi.org/10.5194/gi-6-377-2017, https://doi.org/10.5194/gi-6-377-2017, 2017
Short summary
Short summary
Fluxgate magnetometers are an important geophysical tool but are typically sensitive to changes in sensor temperature. We used a novel, low-cost calibration procedure to compare six matched sensors in which the material used as the mechanical support is varied and found that 30 % glass-filled PEEK engineering plastic is a good candidate for sensors. It is more economical, easier to machine, lighter, and more robust than historically used machinable ceramic.
Wahyudi, Nurul Khakhim, Tri Kuntoro, Djati Mardiatno, Afif Rakhman, Anas Setyo Handaru, Adien Akhmad Mufaqih, and Theodosius Marwan Irnaka
Geosci. Instrum. Method. Data Syst., 6, 319–327, https://doi.org/10.5194/gi-6-319-2017, https://doi.org/10.5194/gi-6-319-2017, 2017
Short summary
Short summary
In geophysics exploration, measuring earth's magnetic field using magnetometers is a necessity to resolve earth's subsurface structure. In this paper we offer an open-schematic fluxgate magnetometer (Magnetogama) that will help people build their own magnetometer. We focus on how to assemble and record earth's magnetic response. Several sensitivity tests were performed to make sure that Magnetogama has the capability to be used in exploration.
Andriy Marusenkov
Geosci. Instrum. Method. Data Syst., 6, 301–309, https://doi.org/10.5194/gi-6-301-2017, https://doi.org/10.5194/gi-6-301-2017, 2017
Short summary
Short summary
The paper discusses the possibility of improving the quality of geomagnetic variation monitoring at ground observatories. The new fluxgate sensor and electronics with upgraded temperature and noise characteristics are described. It is supposed that the application of the results and recommendations discussed in the paper will allow a fluxgate magnetometer to be created with an outstanding level of parameters.
László Hegymegi, János Szöllősy, Csaba Hegymegi, and Ádám Domján
Geosci. Instrum. Method. Data Syst., 6, 279–284, https://doi.org/10.5194/gi-6-279-2017, https://doi.org/10.5194/gi-6-279-2017, 2017
Short summary
Short summary
The authors developed and built a digital non-magnetic declination–inclination magnetometer which gives all measurement data in digital form. Use of this instrument significantly decreases the possibility of observation errors and minimises handwork. We showed that this device is suitable for absolute magnetic control measurements, and it is more convenient, user friendly and effective than the traditional ones.
Santiago Marsal, Juan José Curto, Joan Miquel Torta, Alexandre Gonsette, Vicent Favà, Jean Rasson, Miquel Ibañez, and Òscar Cid
Geosci. Instrum. Method. Data Syst., 6, 269–277, https://doi.org/10.5194/gi-6-269-2017, https://doi.org/10.5194/gi-6-269-2017, 2017
Short summary
Short summary
Commercial solutions for an automated DI-flux are practically reduced to the AutoDIF and the GyroDIF. We analyze the pros and cons of both in terms of suitability at the Livingston Island geomagnetic observatory, Antarctica. We conclude that the GyroDIF is more suitable for harsh conditions due to its simpler infrastructure. We also show the instrument housing design and its control electronics. Our experiences can benefit the geomagnetic community, which often faces similar challenges.
David Fischer, Werner Magnes, Christian Hagen, Ivan Dors, Mark W. Chutter, Jerry Needell, Roy B. Torbert, Olivier Le Contel, Robert J. Strangeway, Gernot Kubin, Aris Valavanoglou, Ferdinand Plaschke, Rumi Nakamura, Laurent Mirioni, Christopher T. Russell, Hannes K. Leinweber, Kenneth R. Bromund, Guan Le, Lawrence Kepko, Brian J. Anderson, James A. Slavin, and Wolfgang Baumjohann
Geosci. Instrum. Method. Data Syst., 5, 521–530, https://doi.org/10.5194/gi-5-521-2016, https://doi.org/10.5194/gi-5-521-2016, 2016
Short summary
Short summary
This paper describes frequency and timing calibration, modeling and data processing and calibration for MMS magnetometers, resulting in a merged search choil and fluxgate data product.
Panagiotis P. Zacharias, Elpida G. Chatzineofytou, Sotirios T. Spantideas, and Christos N. Capsalis
Geosci. Instrum. Method. Data Syst., 5, 281–288, https://doi.org/10.5194/gi-5-281-2016, https://doi.org/10.5194/gi-5-281-2016, 2016
Marina Díaz-Michelena, Rolf Kilian, Ruy Sanz, Francisco Rios, and Oscar Baeza
Geosci. Instrum. Method. Data Syst., 5, 127–142, https://doi.org/10.5194/gi-5-127-2016, https://doi.org/10.5194/gi-5-127-2016, 2016
Short summary
Short summary
The present manuscript is written as the result of an exhaustive field work with MOURA instrument on relevant sites on Earth. MOURA magnetometer was developed for Mars MetNet precursor mission to Mars. In this work we have demonstrated the capabilities of the instrument in terrestrial analogues of Mars, which cover a huge variability range in the magnetic anomalies intensities. Apart from its suitability for prospections, we insist on its advanced performance regarding paleomagnetic information.
M. Díaz-Michelena, R. Sanz, M. F. Cerdán, and A. B. Fernández
Geosci. Instrum. Method. Data Syst., 4, 1–18, https://doi.org/10.5194/gi-4-1-2015, https://doi.org/10.5194/gi-4-1-2015, 2015
Short summary
Short summary
In situ magnetometry is key for planetary mineralogy. However, since magnetic instrumentation is considered secondary in Mars and Moon landers and rovers, magnetometers have often very restricted envelopes of mass, volume and power, and consequently limited functionality.
In this work, it is presented the capability of MOURA small magnetometer and gradiometer to open a wide and novel scientific research on Mars mineralogy and paleomagnetism through the very complex calibration process.
B. B. Narod
Geosci. Instrum. Method. Data Syst., 3, 201–210, https://doi.org/10.5194/gi-3-201-2014, https://doi.org/10.5194/gi-3-201-2014, 2014
R. Čop, G. Milev, D. Deželjin, and J. Kosmač
Geosci. Instrum. Method. Data Syst., 3, 135–141, https://doi.org/10.5194/gi-3-135-2014, https://doi.org/10.5194/gi-3-135-2014, 2014
L. N. S. Alconcel, P. Fox, P. Brown, T. M. Oddy, E. L. Lucek, and C. M. Carr
Geosci. Instrum. Method. Data Syst., 3, 95–109, https://doi.org/10.5194/gi-3-95-2014, https://doi.org/10.5194/gi-3-95-2014, 2014
R. Nakamura, F. Plaschke, R. Teubenbacher, L. Giner, W. Baumjohann, W. Magnes, M. Steller, R. B. Torbert, H. Vaith, M. Chutter, K.-H. Fornaçon, K.-H. Glassmeier, and C. Carr
Geosci. Instrum. Method. Data Syst., 3, 1–11, https://doi.org/10.5194/gi-3-1-2014, https://doi.org/10.5194/gi-3-1-2014, 2014
M. van de Kamp
Geosci. Instrum. Method. Data Syst., 2, 289–304, https://doi.org/10.5194/gi-2-289-2013, https://doi.org/10.5194/gi-2-289-2013, 2013
D. M. Miles, J. R. Bennest, I. R. Mann, and D. K. Millling
Geosci. Instrum. Method. Data Syst., 2, 213–224, https://doi.org/10.5194/gi-2-213-2013, https://doi.org/10.5194/gi-2-213-2013, 2013
A. Khokhlov, J. L. Le Mouël, and M. Mandea
Geosci. Instrum. Method. Data Syst., 2, 1–9, https://doi.org/10.5194/gi-2-1-2013, https://doi.org/10.5194/gi-2-1-2013, 2013
M. A. Pudney, C. M. Carr, S. J. Schwartz, and S. I. Howarth
Geosci. Instrum. Method. Data Syst., 1, 103–109, https://doi.org/10.5194/gi-1-103-2012, https://doi.org/10.5194/gi-1-103-2012, 2012
Cited articles
Bennet, G. G.: A solar ephemeris for use with programmable calculators, The Australian Surveyor, 30, 147–151, 1980.
Jankowski, J. and Sucksdorff, C.: Guide for Magnetic Measurements and Observatory Practice, IAGA, ISBN: 0-9650686-2-5, Warszawa, 235 pp., 1996.
Lalanne, X., Peltier, A., Chulliat, A., Telali, A., and Heumez, B.: A New Measurement Method For Magnetic Repeat Stations, Proceedings of the XVth Iaga Workshop on Geomagnetic Observatory Instruments, Data Acquisition and Processing, Extended Abstract Volume, Published by: Real Instituto y Observatorio de la Armada en San Fernando, Boletín Roa, no. 3/2013 186-188, ISSN: 1131-15504029, 2013.
Newitt, L. R., Barton, C. E., and Bitterly, J.: Guide for Magnetic Repeat Station Surveys, IAGA, ISBN: 0-9650686-1-7, Warszawa, 112 pp., 1996.
Rasson, J. and Gonsette, A.: Méthode pour Déterminer une Direction Géographique et Dispositif Associé, Belgian patent G01C 19/38 G01C 25/00, Numéro de publication: 1021970, Numéro de dépôt: 2014/0524, Date de délivrance: 29 January 2016.
Rasson J. L., Hendrickx, O., Marin J. L., Humbled, F., and Genzi, L.: WIDIF: A new diflux optimized for field use, The Journal of Indian Geophysical Union, 2, 9–18, 2016.
Reda, I. and Andreas, A.: Solar Position Algorithm for Solar Radiation Applications. 55 pp.; NREL Report No. TP-560-34302, revised January 2008, available at: http://www.nrel.gov/docs/fy08osti/34302.pdf (last access: July 2017), 2003.
Šugar, D., Brkić, M., and Špoljarić, D.: Comparison of the reference mark azimuth determination methods, Ann. Geophys., 55, https://doi.org/10.4401/ag-5405, 2013.
Short summary
In geomagnetism, geodesy and in general disciplines requiring orientation on Earth, accurately finding the direction of true north is a challenge. This paper describes a method to do so using a traditional theodolite and the proposed apparatus: an electro-optical add-on. The details of the concepts, design and operation of the add-on are explained.
In geomagnetism, geodesy and in general disciplines requiring orientation on Earth, accurately...
