Journal cover Journal topic
Geoscientific Instrumentation, Methods and Data Systems An interactive open-access journal of the European Geosciences Union

Journal metrics

  • IF value: 1.023 IF 1.023
  • IF 5-year<br/> value: 1.557 IF 5-year
    1.557
  • CiteScore<br/> value: 0.86 CiteScore
    0.86
  • SNIP value: indexed SNIP
    indexed
  • SJR value: indexed SJR
    indexed
  • IPP value: indexed IPP
    indexed
  • h5-index value: 10 h5-index 10
Geosci. Instrum. Method. Data Syst., 6, 487-493, 2017
https://doi.org/10.5194/gi-6-487-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
Research article
09 Nov 2017
Merging fluxgate and induction coil data to produce low-noise geomagnetic observatory data meeting the INTERMAGNET definitive 1 s data standard
Heinz-Peter Brunke1, Rudolf Widmer-Schnidrig2, and Monika Korte1 1GFZ German Research Centre for Geosciences, Telegrafenberg, 14473 Potsdam, Germany
2Black Forest Observatory, Heubach 207, 77709 Wolfach, Germany
Abstract. For frequencies above 30 mHz the instrument intrinsic noise level of typical fluxgate magnetometers used at geomagnetic observatories usually masks ambient magnetic field variations on magnetically quiet days. This is especially true for stations located at middle and low latitudes, where variations are generally smaller than at high latitudes. INTERMAGNET has set a minimum quality standard for definitive 1 s data. Natural field variations referred to as pulsations (Pc-1, Pc-2, Pi-1) fall in this band. Usually their intensity is so small that they rarely surpass the instrumental noise of fluxgate magnetometers. Moreover, high-quality magnetic field observations in the band 30 mHz–0.5 Hz contain interesting information, e.g., for the study of ionospheric electron interactions with electromagnetic ion cyclotron plasma waves.

We propose a method to improve 1 Hz observatory data by merging data from the proven and tested fluxgate magnetometers currently in use with induction coil magnetometers into a single data stream. We show how measurements of both instruments can be combined without information loss or phase distortion.

The result is a time series of the magnetic field vector components, combining the benefits of both instruments: long-term stability (fluxgate) and low noise at high frequencies (induction coil). This new data stream fits perfectly into the data management procedures of INTERMAGNET and meets the requirements defined in the definitive 1 s data standard. We describe the applied algorithm and validate the result by comparing power spectra of the fluxgate magnetometer output with the merged signal. Daily spectrograms from the Niemegk observatory show that the resulting data series reveal information at frequencies above 30 mHz that cannot be seen in raw fluxgate data.


Citation: Brunke, H.-P., Widmer-Schnidrig, R., and Korte, M.: Merging fluxgate and induction coil data to produce low-noise geomagnetic observatory data meeting the INTERMAGNET definitive 1 s data standard, Geosci. Instrum. Method. Data Syst., 6, 487-493, https://doi.org/10.5194/gi-6-487-2017, 2017.
Publications Copernicus
Download
Short summary
In magnetic observatory data, according to the INTERMAGNET definitive 1 s data standard, the fluxgate magnetometer self noise usually covers the natural signal for frequencies higher than about 30 mHz. We present a numerical method how to merge the data with induction coil data in order to drastically reduce noise and to fill the entire possible bandwidth with information on the earth magnetic field. In spectrograms we visualize interesting phenomena revealed with the method.
In magnetic observatory data, according to the INTERMAGNET definitive 1 s data standard, the...
Share