Articles | Volume 6, issue 2
https://doi.org/10.5194/gi-6-505-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
https://doi.org/10.5194/gi-6-505-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
Research article
| 
04 Dec 2017
Research article |
| 04 Dec 2017
Data quality control and tools in passive seismic experiments exemplified on the Czech broadband seismic pool MOBNET in the AlpArray collaborative project
Luděk Vecsey
CORRESPONDING AUTHOR
Institute of Geophysics of the Czech Academy of Sciences, 14131
Prague, Czech Republic
Jaroslava Plomerová
Institute of Geophysics of the Czech Academy of Sciences, 14131
Prague, Czech Republic
Petr Jedlička
Institute of Geophysics of the Czech Academy of Sciences, 14131
Prague, Czech Republic
Helena Munzarová
Institute of Geophysics of the Czech Academy of Sciences, 14131
Prague, Czech Republic
Vladislav Babuška
Institute of Geophysics of the Czech Academy of Sciences, 14131
Prague, Czech Republic
the AlpArray working group
A full list of authors and their affiliations appears at the end of the paper.
Related authors
Jaroslava Plomerová, Helena Žlebčíková, György Hetényi, Luděk Vecsey, Vladislav Babuška, and AlpArray-EASI and AlpArray working
groups
Solid Earth, 13, 251–270, https://doi.org/10.5194/se-13-251-2022, https://doi.org/10.5194/se-13-251-2022, 2022
Short summary
Short summary
We present high-resolution tomography images of upper mantle structure beneath the E Alps and the adjacent Bohemian Massif. The northward-dipping lithosphere, imaged down to ∼200 km beneath the E Alps without signs of delamination, is probably formed by a mixture of a fragment of detached European plate and the Adriatic plate subductions. A detached high-velocity anomaly, sub-parallel to and distinct from the E Alps heterogeneity, is imaged at ∼100–200 km beneath the southern part of the BM.
L. Vecsey, J. Plomerová, and V. Babuška
Solid Earth, 5, 779–792, https://doi.org/10.5194/se-5-779-2014, https://doi.org/10.5194/se-5-779-2014, 2014
Konstantinos Michailos, György Hetényi, Matteo Scarponi, Josip Stipčević, Irene Bianchi, Luciana Bonatto, Wojciech Czuba, Massimo Di Bona, Aladino Govoni, Katrin Hannemann, Tomasz Janik, Dániel Kalmár, Rainer Kind, Frederik Link, Francesco Pio Lucente, Stephen Monna, Caterina Montuori, Stefan Mroczek, Anne Paul, Claudia Piromallo, Jaroslava Plomerová, Julia Rewers, Simone Salimbeni, Frederik Tilmann, Piotr Środa, Jérôme Vergne, and the AlpArray-PACASE Working Group
Earth Syst. Sci. Data, 15, 2117–2138, https://doi.org/10.5194/essd-15-2117-2023, https://doi.org/10.5194/essd-15-2117-2023, 2023
Short summary
Short summary
We examine the spatial variability of the crustal thickness beneath the broader European Alpine region by using teleseismic earthquake information (receiver functions) on a large amount of seismic waveform data. We compile a new Moho depth map of the broader European Alps and make our results freely available. We anticipate that our results can potentially provide helpful hints for interdisciplinary imaging and numerical modeling studies.
Jaroslava Plomerová, Helena Žlebčíková, György Hetényi, Luděk Vecsey, Vladislav Babuška, and AlpArray-EASI and AlpArray working
groups
Solid Earth, 13, 251–270, https://doi.org/10.5194/se-13-251-2022, https://doi.org/10.5194/se-13-251-2022, 2022
Short summary
Short summary
We present high-resolution tomography images of upper mantle structure beneath the E Alps and the adjacent Bohemian Massif. The northward-dipping lithosphere, imaged down to ∼200 km beneath the E Alps without signs of delamination, is probably formed by a mixture of a fragment of detached European plate and the Adriatic plate subductions. A detached high-velocity anomaly, sub-parallel to and distinct from the E Alps heterogeneity, is imaged at ∼100–200 km beneath the southern part of the BM.
Irene Bianchi, Elmer Ruigrok, Anne Obermann, and Edi Kissling
Solid Earth, 12, 1185–1196, https://doi.org/10.5194/se-12-1185-2021, https://doi.org/10.5194/se-12-1185-2021, 2021
Short summary
Short summary
The European Alps formed during collision between the European and Adriatic plates and are one of the most studied orogens for understanding the dynamics of mountain building. In the Eastern Alps, the contact between the colliding plates is still a matter of debate. We have used the records from distant earthquakes to highlight the geometries of the crust–mantle boundary in the Eastern Alpine area; our results suggest a complex and faulted internal crustal structure beneath the higher crests.
Pavol Zahorec, Juraj Papčo, Roman Pašteka, Miroslav Bielik, Sylvain Bonvalot, Carla Braitenberg, Jörg Ebbing, Gerald Gabriel, Andrej Gosar, Adam Grand, Hans-Jürgen Götze, György Hetényi, Nils Holzrichter, Edi Kissling, Urs Marti, Bruno Meurers, Jan Mrlina, Ema Nogová, Alberto Pastorutti, Corinne Salaun, Matteo Scarponi, Josef Sebera, Lucia Seoane, Peter Skiba, Eszter Szűcs, and Matej Varga
Earth Syst. Sci. Data, 13, 2165–2209, https://doi.org/10.5194/essd-13-2165-2021, https://doi.org/10.5194/essd-13-2165-2021, 2021
Short summary
Short summary
The gravity field of the Earth expresses the overall effect of the distribution of different rocks at depth with their distinguishing densities. Our work is the first to present the high-resolution gravity map of the entire Alpine orogen, for which high-quality land and sea data were reprocessed with the exact same calculation procedures. The results reflect the local and regional structure of the Alpine lithosphere in great detail. The database is hereby openly shared to serve further research.
Jiří Kvapil, Jaroslava Plomerová, Hana Kampfová Exnerová, Vladislav Babuška, György Hetényi, and AlpArray Working Group
Solid Earth, 12, 1051–1074, https://doi.org/10.5194/se-12-1051-2021, https://doi.org/10.5194/se-12-1051-2021, 2021
Short summary
Short summary
This paper presents a high-resolution 3-D shear wave velocity (vS) model of the Bohemian Massif crust imaged from high-density data and enhanced depth sensitivity of tomographic inversion. The dominant features of the model are relatively higher vS in the upper crust than in its surrounding, a distinct intra-crustal interface, and a velocity decrease in the lower part of the crust. The low vS in the lower part of the crust is explained by the anisotropic fabric of the lower crust.
Marcel Tesch, Johannes Stampa, Thomas Meier, Edi Kissling, György Hetényi, Wolfgang Friederich, Michael Weber, Ben Heit, and the AlpArray Working Group
Solid Earth Discuss., https://doi.org/10.5194/se-2020-122, https://doi.org/10.5194/se-2020-122, 2020
Publication in SE not foreseen
Irene Molinari, John Clinton, Edi Kissling, György Hetényi, Domenico Giardini, Josip Stipčević, Iva Dasović, Marijan Herak, Vesna Šipka, Zoltán Wéber, Zoltán Gráczer, Stefano Solarino, the Swiss-AlpArray Field Team, and the AlpArray Working Group
Adv. Geosci., 43, 15–29, https://doi.org/10.5194/adgeo-43-15-2016, https://doi.org/10.5194/adgeo-43-15-2016, 2016
Short summary
Short summary
AlpArray is a collaborative seismological project in Europe that includes ~ 50 research institutes and seismological observatories. At its heart is the collection of top-quality seismological data from a dense network of stations in the Alpine region: the AlpArray Seismic Network (AASN). We report the Swiss contribution: site selections, installation, data quality and management. We deployed 27 temporary BB stations across 5 countries as result of a fruitful collaboration between 5 institutes.
Hanna Silvennoinen, Elena Kozlovskaya, and Eduard Kissling
Solid Earth, 7, 425–439, https://doi.org/10.5194/se-7-425-2016, https://doi.org/10.5194/se-7-425-2016, 2016
Short summary
Short summary
POLENET/LAPNET broadband seismic network was deployed in northern Fennoscandia 2007–2009. In our study we estimate the 3D architecture of the upper mantle beneath the network using high-resolution teleseismic P-wave tomography. Our study reveals a highly heterogeneous lithospheric mantle. The most significant feature seen in the obtained velocity model is a large elongated low-velocity anomaly beneath the crust, separating the three cratonic units that formed the region in the early Proterozoic.
L. Vecsey, J. Plomerová, and V. Babuška
Solid Earth, 5, 779–792, https://doi.org/10.5194/se-5-779-2014, https://doi.org/10.5194/se-5-779-2014, 2014
Related subject area
Data quality
Upgrade of LSA-SAF Meteosat Second Generation daily surface albedo (MDAL) retrieval algorithm incorporating aerosol correction and other improvements
Swarm Langmuir probes' data quality validation and future improvements
Evaluating methods for reconstructing large gaps in historic snow depth time series
Production of definitive data from Indonesian geomagnetic observatories
Auroral classification ergonomics and the implications for machine learning
Artifacts from manganese reduction in rock samples prepared by focused ion beam (FIB) slicing for X-ray microspectroscopy
The influence of sample geometry on the permeability of a porous sandstone
The operator difference in absolute geomagnetic measurements
One second vector and scalar magnetic measurements at the low-latitude Choutuppal (CPL) magnetic observatory
Time-stamp correction of magnetic observatory data acquired during unavailability of time-synchronization services
Stability analysis of geomagnetic baseline data obtained at Cheongyang observatory in Korea
European UV DataBase (EUVDB) as a repository and quality analyser for solar spectral UV irradiance monitored in Sodankylä
Bed conduction impact on fiber optic distributed temperature sensing water temperature measurements
A framework for benchmarking of homogenisation algorithm performance on the global scale
New analysis software for Viking Lander meteorological data
Innovations and applications of the VERA quality control
Daniel Juncu, Xavier Ceamanos, Isabel F. Trigo, Sandra Gomes, and Sandra C. Freitas
Geosci. Instrum. Method. Data Syst., 11, 389–412, https://doi.org/10.5194/gi-11-389-2022, https://doi.org/10.5194/gi-11-389-2022, 2022
Short summary
Short summary
MDAL is a near real-time, satellite-based surface albedo product based on the geostationary Meteosat Second Generation mission. We propose an update to the processing algorithm that generates MDAL and evaluate the results of these changes through comparison with the pre-update, currently operational MDAL product as well as reference data using different satellite-based albedo products and in situ measurements. We find that the update provides a valuable improvement.
Filomena Catapano, Stephan Buchert, Enkelejda Qamili, Thomas Nilsson, Jerome Bouffard, Christian Siemes, Igino Coco, Raffaella D'Amicis, Lars Tøffner-Clausen, Lorenzo Trenchi, Poul Erik Holmdahl Olsen, and Anja Stromme
Geosci. Instrum. Method. Data Syst., 11, 149–162, https://doi.org/10.5194/gi-11-149-2022, https://doi.org/10.5194/gi-11-149-2022, 2022
Short summary
Short summary
The quality control and validation activities performed by the Swarm data quality team reveal the good-quality LPs. The analysis demonstrated that the current baseline plasma data products are improved with respect to previous baseline. The LPs have captured the ionospheric plasma variability over more than half of a solar cycle, revealing the data quality dependence on the solar activity. The quality of the LP data will further improve promotion of their application to a broad range of studies.
Johannes Aschauer and Christoph Marty
Geosci. Instrum. Method. Data Syst., 10, 297–312, https://doi.org/10.5194/gi-10-297-2021, https://doi.org/10.5194/gi-10-297-2021, 2021
Short summary
Short summary
Methods for reconstruction of winter long data gaps in snow depth time series are compared. The methods use snow depth data from neighboring stations or calculate snow depth from temperature and precipitation data. All methods except one are able to reproduce the average snow depth and maximum snow depth in a winter reasonably well. For reconstructing the number of snow days with snow depth ≥ 1 cm, results suggest using a snow model instead of relying on data from neighboring stations.
Relly Margiono, Christopher W. Turbitt, Ciarán D. Beggan, and Kathryn A. Whaler
Geosci. Instrum. Method. Data Syst., 10, 169–182, https://doi.org/10.5194/gi-10-169-2021, https://doi.org/10.5194/gi-10-169-2021, 2021
Short summary
Short summary
We have produced a standardised high-quality set of measurements to create definitive data for four Indonesian Geomagnetic Observatories for 2010–2018. We explain the steps taken to update the existing data collection and processing protocols and suggest improvements to further enhance the quality of the magnetic time series at each observatory. The new data will fill the gap in the western Pacific region and provide input into geomagnetic field modeling and secular variation studies.
Derek McKay and Andreas Kvammen
Geosci. Instrum. Method. Data Syst., 9, 267–273, https://doi.org/10.5194/gi-9-267-2020, https://doi.org/10.5194/gi-9-267-2020, 2020
Short summary
Short summary
Researchers are making increasing use of machine learning to improve accuracy, efficiency and consistency. During such a study of the aurora, it was noted that biases or distortions had crept into the data because of the conditions (or ergonomics) of the human trainers. As using machine-learning techniques in auroral research is relatively new, it is critical that such biases are brought to the attention of the academic and citizen science communities.
Dorothea S. Macholdt, Jan-David Förster, Maren Müller, Bettina Weber, Michael Kappl, A. L. David Kilcoyne, Markus Weigand, Jan Leitner, Klaus Peter Jochum, Christopher Pöhlker, and Meinrat O. Andreae
Geosci. Instrum. Method. Data Syst., 8, 97–111, https://doi.org/10.5194/gi-8-97-2019, https://doi.org/10.5194/gi-8-97-2019, 2019
Short summary
Short summary
Focused ion beam (FIB) slicing is a widely used technique to prepare ultrathin slices for the microanalysis of geological and environmental samples. During our investigations of the manganese oxidation states in rock varnish slices, we found an FIB-related reduction of manganese(IV) to manganese(II) at the samples’ surfaces. This study characterizes the observed reduction artifacts and emphasizes that caution is needed in the analysis of transition metal oxidation states upon FIB preparation.
Michael J. Heap
Geosci. Instrum. Method. Data Syst., 8, 55–61, https://doi.org/10.5194/gi-8-55-2019, https://doi.org/10.5194/gi-8-55-2019, 2019
Short summary
Short summary
To better understand the influence of sample geometry on laboratory measurements of permeability, the permeabilities of sandstone samples with different lengths and diameters were measured. Despite the large range in length, aspect ratio, and volume, the permeabilities of the samples are near identical. This is due to a homogeneous porosity structure and the small grain/pore size with respect to the minimum tested diameter and length. More tests are now needed to help develop such guidelines.
Yufei He, Xudong Zhao, Jianjun Wang, Fuxi Yang, Xijing Li, Changjiang Xin, Wansheng Yan, and Wentong Tian
Geosci. Instrum. Method. Data Syst., 8, 21–27, https://doi.org/10.5194/gi-8-21-2019, https://doi.org/10.5194/gi-8-21-2019, 2019
Nelapatla Phani Chandrasekhar, Sai Vijay Kumar Potharaju, Kusumita Arora, Chandra Shakar Rao Kasuba, Leonid Rakhlin, Sergey Tymoshyn, Laszlo Merenyi, Anusha Chilukuri, Jayashree Bulusu, and Sergey Khomutov
Geosci. Instrum. Method. Data Syst., 6, 547–560, https://doi.org/10.5194/gi-6-547-2017, https://doi.org/10.5194/gi-6-547-2017, 2017
Short summary
Short summary
This work presents the progressive steps which led to the successful setup of such measurements at the new magnetic observatory in Choutuppal (CPL) of CSIR-NGRI, Hyderabad, India. Iterative tuning of the setup led to the generation of good quality data from 2016 onward. The processes of commissioning this setup in low-latitude conditions, with the aim of producing 1 s definitive data, and the characteristics of the data from this new instrument are presented here.
Pierdavide Coïsson, Kader Telali, Benoit Heumez, Vincent Lesur, Xavier Lalanne, and Chang Jiang Xin
Geosci. Instrum. Method. Data Syst., 6, 311–317, https://doi.org/10.5194/gi-6-311-2017, https://doi.org/10.5194/gi-6-311-2017, 2017
Short summary
Short summary
Data loggers of magnetic observatories use GPS receivers to provide accurate time stamping of recorded data. Typical sampling rate is 1 s. A failure of the GPS receiver can result in erroneous time stamps. The observatory of Lanzhou, China, accumulated a lag of 28 s over 1 year. Using magnetic data recorded at other locations in a radius of 3000 km it was possible to estimate the diurnal lag and correct the time tamps to produce reliable 1 min averages of magnetic data.
Shakirah M. Amran, Wan-Seop Kim, Heh Ree Cho, and Po Gyu Park
Geosci. Instrum. Method. Data Syst., 6, 231–238, https://doi.org/10.5194/gi-6-231-2017, https://doi.org/10.5194/gi-6-231-2017, 2017
Short summary
Short summary
In this work, we analysed the Cheongyang geomagnetic baseline data from 2014 to 2016. We observed a step of more than 5 nT in the H and Z baseline in 2014 and 2015 due to artificial magnetic noise in the absolute hut. The baseline also shows a periodic modulation due to temperature variations in the fluxgate magnetometer hut. The quality of the baselines was improved by correcting the discontinuity in the H and Z baselines.
Anu Heikkilä, Jussi Kaurola, Kaisa Lakkala, Juha Matti Karhu, Esko Kyrö, Tapani Koskela, Ola Engelsen, Harry Slaper, and Gunther Seckmeyer
Geosci. Instrum. Method. Data Syst., 5, 333–345, https://doi.org/10.5194/gi-5-333-2016, https://doi.org/10.5194/gi-5-333-2016, 2016
Short summary
Short summary
Solar spectral UV irradiance data measured by the Brewer #037 spectroradiometer in Sodankylä, Finland, in 1990–2014 were examined for their quality flags given by the quality assurance (QA) tools of the European UV DataBase (EUVDB). Statistical analysis on the flags was performed, and five cases were investigated in detail. The results can be used in further development of the quality control/QA tools and selection of cases of exceptional atmospheric conditions for process studies.
T. O'Donnell Meininger and J. S. Selker
Geosci. Instrum. Method. Data Syst., 4, 19–22, https://doi.org/10.5194/gi-4-19-2015, https://doi.org/10.5194/gi-4-19-2015, 2015
K. Willett, C. Williams, I. T. Jolliffe, R. Lund, L. V. Alexander, S. Brönnimann, L. A. Vincent, S. Easterbrook, V. K. C. Venema, D. Berry, R. E. Warren, G. Lopardo, R. Auchmann, E. Aguilar, M. J. Menne, C. Gallagher, Z. Hausfather, T. Thorarinsdottir, and P. W. Thorne
Geosci. Instrum. Method. Data Syst., 3, 187–200, https://doi.org/10.5194/gi-3-187-2014, https://doi.org/10.5194/gi-3-187-2014, 2014
O. Kemppinen, J. E. Tillman, W. Schmidt, and A.-M. Harri
Geosci. Instrum. Method. Data Syst., 2, 61–69, https://doi.org/10.5194/gi-2-61-2013, https://doi.org/10.5194/gi-2-61-2013, 2013
D. Mayer, A. Steiner, and R. Steinacker
Geosci. Instrum. Method. Data Syst., 1, 135–149, https://doi.org/10.5194/gi-1-135-2012, https://doi.org/10.5194/gi-1-135-2012, 2012
Cited articles
AlpArray Seismic Network: Eastern Alpine Seismic Investigation (EASI) – AlpArray Complementary Experiment, AlpArray Working Group, Other/Seismic Network, https://doi.org/10.12686/alparray/xt_2014, 2014.
AlpArray Seismic Network: AlpArray Seismic Network (AASN) temporary component, AlpArray Working Group, Other/Seismic Network, https://doi.org/10.12686/alparray/z3_2015, 2015.
Custódio, S., Dias, N. A., Caldeira, B., Carrilho, F., Carvalho, S., Corela, C., Díaz, J., Narciso, J., Madureira, G., Matias, L, Haberland, Ch., and WILAS Team: Ambient noise recorded by a dense broadband seismic deployment in Western Iberia, B. Seismol. Soc. Am., 104, 2985–3007, https://doi.org/10.1785/0120140079, 2014.
Díaz, J., Villaseñor, A., Morales, J., Pazos, A., Cordoba, D., Pulgar, J., García-Lobón, J. L., Harnafi, M., Carbonell, R., Gallart, J., and TopoIberia Seismic Working Group: Background noise characteristics at the IberArray broadband seismic network, B. Seismol. Soc. Am., 12, 618–628, https://doi.org/10.1785/0120090085, 2010.
Ekström, G. and Busby, R. W.: Measurements of seismometer orientation at USArray transportable array and backbone stations, Seismol. Res. Lett., 79, 555–561, https://doi.org/10.1785/gssrl.79.4.554, 2008.
Fuchs, F., Kolínský, P., Gröschl, G., Bokelmann, G., and the AlpArray Working Group: AlpArray in Austria and Slovakia: technical realization, site description and noise characterization, Adv. Geosci., 43, 1–13, https://doi.org/10.5194/adgeo-43-1-2016, 2016.
Handy, M. R., Schmid, S. M., Bousquet, R., Kissling, E., and Bernoulli, D.: Reconciling plate-tectonic reconstructions of Alpine Tethys with the geological–geophysical record of spreading and subduction in the Alps, Earth-Sci. Rev., 102, 121–158, https://doi.org/10.1016/j.earscirev.2010.06.002, 2010.
Institute of Geophysics: Academy of Sciences of the Czech Republic: Czech Regional Seismic Network, International Federation of Digital Seismograph Networks, Other/Seismic Network, https://doi.org/10.7914/SN/CZ, 1973.
Institute of Geophysics: Academy of Sciences of the Czech Republic: West Bohemia Local Seismic Network, International Federation of Digital Seismograph Networks, Other/Seismic Network, https://doi.org/10.7914/SN/WB, 1991.
Kissling, E., Schmid, S. M., Lippitsch, R., Ansorge, J., and Fügenschuh, B.: Lithosphere structure and tectonic evolution of the Alpine arc: new evidence from high-resolution teleseismic tomography, in: European Lithosphere Dynamics, edited by: Gee, D. and Stephenson, R. A., Geological Society London, Memoirs 32, 129–145, 2006.
Krischer, L., Megies, T., Barsch, R., Beyreuther, M., Lecocq, T., Caudron, C., and Wassermann, J.: ObsPy: a bridge for seismology into the scientific Python ecosystem, Computational Science & Discovery, 8, 014003, https://doi.org/10.1088/1749-4699/8/1/014003, 2015.
Lippitsch, R., Kissling, E., and Ansorge, J.: Upper mantle structure beneath the Alpine orogen from high-resolution teleseismic tomography, J. Geophys. Res., 108, 2376, https://doi.org/10.1029/2002JB002016, 2003.
McNamara, D. E. and Buland, R. P.: Ambient noise levels in the continental United States, B. Seismol. Soc. Am., 94, 1517–1527, https://doi.org/10.1785/012003001, 2004.
Molinari, I., Clinton, J., Kissling, E., Hetényi, G., Giardini, D., Stipcevic, J., Dasovic, I., Herak, M., Šipka, V., Wéber, Z., Gráczer, Z., Solarino, S., the Swiss-AlpArray Field Team, and the AlpArray Working Group: Swiss-AlpArray temporary broadband seismic stations deployment and noise characterization, Adv. Geosci., 43, 15–29, https://doi.org/10.5194/adgeo-43-15-2016, 2016.
Peterson, J.: Observations and modeling of seismic background noise, USGS Open-File report, 93–322, 1993.
Plomerová, J., Achauer. U., Babuška, V., Vecsey, L., and BOHEMA working group: Upper mantle beneath the Eger Rift (Central Europe): plume or asthenosphere upwelling?, Geophys. J. Int., 169, 675–682, https://doi.org/10.1111/j.1365-246X.2007.03361.x, 2007.
Rueda, J. and Mezcua, J.: Orientation analysis of the Spanish broadband national network using Rayleigh-wave polarization, Seismol. Res. Lett., 86, 929–940, https://doi.org/10.1785/0220140149, 2015.
Stachnik, J.C, Sheehan, A. F., Zietlow, D. W., Yang, Z., Collins, J., and Ferris, A.: Determination of New Zealand Ocean Bottom Seismometer Orientation via Rayleigh-Wave Polarization, Seismol. Res. Lett., 83, 704–713, https://doi.org/10.1785/0220110128, 2012.
Vecsey, L., Plomerová, J., and Babuška, V.: Mantle lithosphere transition from the East European Craton to the Variscan Bohemian Massif imaged by shear-wave splitting, Solid Earth, 5, 779–792, https://doi.org/10.5194/se-5-779-2014, 2014.
Wang, X., Chen, Q. F., Li, J., and Wei, S. J.: Seismic Sensor Misorientation Measurement Using P-Wave Particle Motion: An Application to the NECsaids Array, Seismol. Res. Lett., 87, 901–911, https://doi.org/10.1785/0220160005, 2016.
Wessel, P. and Smith, W. H. F.: New, improved version of the Generic Mapping Tools released, Eos T. AGU, 79, 579, https://doi.org/10.1029/98EO00426, 1998.
Wilde-Piórko, M., Geissler, W. H., Plomerová, J., Knapmeyer-Endrun, B., Grad, M., Babuška, V., Brückl, E., Cyziene, J., Czuba, W., England, R., Gaczyński, E., Gazdova, R., Gregersen, S., Guterch, A., Hanka, W., Hegedús, E., Heuer, B., Jedlička, P., Lazauskiene, J., Keller, G. R., Kind, R., Klinge, K., Kolinsky, P., Komminaho, K., Kozlovskaya, E., Krüger, F., Larsen, T., Majdański, M., Malek, J., Motuza, G., Novotný, O., Pietrasiak, R., Plenefisch, T., Ružek, B., Sliaupa, S., Środa, P., Świeczak, M., Tiira, T., Voss, P., and Wiejacz, P.: PASSEQ 2006–2008: Passive Seismic Experiment in Trans-European Suture Zone, Deutsches GeoForschungsZentrum GFZ, Other/Seismic Network, https://doi.org/10.14470/2R383989, 2006.
Wolin, E., van der Lee, S., Bollmann, T. A., Wiens, D. A., Revenaugh, J., Darbyshire, F. A., Frederiksen, A. W., Stein, S., and Wysession, M. E.: Seasonal and diurnal variations in long-period noise at SPREE stations: the Influence of soil characteristics on shallow stations performance, B. Seismol. Soc. Am., 105, 2433–2452, https://doi.org/10.1785/0120150046, 2015.
Short summary
This paper focuses on major issues related to data reliability and MOBNET network performance in the AlpArray seismic experiments. We present both new hardware and software tools that help to assure the high-quality standard of broadband seismic data. Special attention is paid to issues like a detection of sensor misorientation, timing problems, exchange of record components and/or their polarity reversal, sensor mass centring, or anomalous channel amplitudes due to imperfect gain.
This paper focuses on major issues related to data reliability and MOBNET network performance in...
