Most downloaded  

We describe a new drill for glaciers and ice sheets. Instead of drilling down into the ice, via mechanical action, our drill melts into the ice. Our goal is simply to pull a cable of temperature sensors on a one-way trip down to the ice–bed interface. Here, we describe the design and testing of our drill. Under laboratory conditions, our melt-tip drill has an efficiency of ∼ 35 % with a theoretical maximum penetration rate of ∼ 12 m h⁻¹. Under field conditions, our efficiency is just ∼ 15 %.

Lidar networks coordinate efforts of different groups, providing guidelines to homogenize retrievals from different instruments. We describe an ongoing effort to develop the Lidar Processing Pipeline (LPP) collaboratively, a collection of tools developed in C/C++ to handle all the steps of a typical lidar analysis. Analysis of simulations and real lidar data showcases the LPP’s features. From this exercise, we draw a roadmap to guide future development, accommodating the needs of our community.

The study investigates how low-cost technology can be applied in data-scarce catchments to improve water resource management. More specifically, we investigate how drone technology can be combined with low-cost real-time kinematic positioning (RTK) global navigation satellite system (GNSS) equipment and subsequently applied to a 3D hydraulic model so as to generate more physically based rating curves.

Soil moisture monitoring is important for many applications, from improving weather prediction to supporting agriculture practices. Our capability to measure this variable is still, however, limited. In this study, we show the tests conducted on a new soil moisture sensor at several locations. The results show that the new sensor is a valid and compact alternative to more conventional, non-invasive soil moisture sensors that can pave the way for a wide range of applications.

We propose a new type of power station unit with wireless data transmission capability, which was not supported by same type of instrument as on the market. Based on this, a novel distributed geophysical data acquisition architecture is also proposed. The proposed instrument loads more stations than the industry-leading LAUL-428 while providing additional wireless data transmission and narrowband Internet of Things remote control.

Meltwater runoff estimates from the Greenland ice sheet contain uncertainty. To better understand ice sheet hydrology, we installed a weather station and river stage sensors along three proglacial rivers in a cold-bedded area of NW Greenland without firn, crevasse, or moulin influence. The first 3 years (2019–2021) of observations have given us a first look at the seasonal and annual weather and hydrological patterns of this understudied region.

We present the implementation of a VLF/LF network to search for earthquake electromagnetic precursors. The proposed system will deliver a steady stream of real-time amplitude and phase measurements as well as a daily recording VLF/LF data set. The first implementation of the system was done in Graz, Austria. The second one will be in Guyancourt (France), with a third one in Réunion (France) and a fourth one in Moratuwa (Sri Lanka).

The paper describes the ground-based camera equipment to obtain images from dust ablation phenomena (meteors) in the Earth's atmosphere. The meteors are observed from two locations, but one station is equipped with a camera containing a spectral grating, which allows following and determining the spectral information through the meteor ablation process. We describe the data merging, calibration, and processing to finally derive the meteor composition.

The gas equilibrium membrane inlet mass spectrometry (GE-MIMS) method for dissolved-gas quantification was expanded to work in water at high pressures.

Motivated by recent community interest in a satellite mission to the atmospheric lower thermosphere and ionosphere (LTI) region (100–200 km altitude), the DIPCont project is concerned with the reconstruction quality of vertical profiles of key LTI variables using dual- and single-spacecraft observations. The report introduces the probabilistic DIPCont modeling framework, demonstrates its usage by means of a set of self-consistent parametric non-isothermal models, and discusses first results.

Multiple geologic hazards, such as landslides and earthquakes, arise when solids and fluids coexist and deform together. We designed an experimental apparatus that allows us to observe such deformation in 3D. The first results show how fluids and solids deform and break at the same time, allowing us to study the impact of both materials on deformation distribution and speed. Making these processes visible has the potential to improve risk assessments associated with geological hazards.

This paper proposes a new online data transmission technology for marine controlled-source electromagnetic (MCSEM) transmitters. The technology enables high-precision data acquisition, storage, and ethernet file transmission and offers significant convenience. This technology has the potential to revolutionize the application of MCSEM transmitters in marine explorations and to offer significant convenience.

AERO and VISTA spacecraft will use commercial magnetometers to measure space weather events near Earth’s aurora. The small size of AERO and VISTA necessitate the use of magnetometers with small size, weight, and power. The magnetometers selected exhibit good precision, but additional calibration is needed to achieve good accuracy. This work evaluates a method for calibration by regression which has reduced the magnetic observed error by a factor of ca. 50, meeting mission requirements.

Magnetic field measurements in space can be contaminated by stray magnetic fields from their host satellite. We present an automated tool for measuring the magnetic field generated by potential satellite and instrument components to identify those that may degrade the measurements taken on orbit. This tool is designed for use by the Tandem Reconnection and Cusp Electrodynamics Reconnaissance Satellites (TRACERS) Small Explorers mission and is currently being used for mission design activities.

Research data resulting from geoscientific laboratory methods comprise multiple types and formats. A diversity of Earth system science fuels are needed to make research data available to scientists beyond a particular discipline. Global working groups define standards and create tools to improve research data handling in general. Adaption of these solutions to the needs of the geoscientific disciplines is vital to enable the development of a widely applicable geoscientific laboratory database.

This paper presents a design for a 3D-printed rechargeable electrode that measures self-potential (SP) in different types of laboratory experiments. It is small, cheap, robust, and stable, and it offers the same performance as custom-machined laboratory standards. The use of 3D printing technology makes the electrode more versatile and cost-effective than traditional laboratory standards. Examples of its use under both low and high pressure have been included, as have 3D-printable designs.

Geomagnetic observatories are dedicated to the long-term monitoring of the Earth's magnetic field. Their time series contain information mainly about the Earth's core and the near-Earth space environment. MOSFiT accesses a global database with the most recent observatory data and allows us to separate the information about the Earth's core. At the same time, it allows for an efficient check of the data quality. We present the code, validate it and explain its usage.

Data recorded with transient electromagnetics are typically gated to improve the signal-to-noise ratio. Gating corresponds to low-pass filtering of data with the shape of the gate giving the frequency response. We show that standard gate shapes can lead to significant correlation between gates caused by distortion from VLF radios. A multi-objective cost function is used to select optimum gate shapes with less influence from radio noise. Performance is demonstrated using synthetic and field data.

Manual chambers for soil respiration monitoring can be cost-effective yet rather accurate devices. The described chamber is relatively low in cost and entirely built from commercial parts, which makes it very accessible for almost everybody. Our chamber is robust, simple to operate, and very suitable for a large-scale punctual campaign and for educational purposes. Oxygen sensors bring some more insights into our soil respiration understanding.